 | "A Simple Two Switch
Cycloconverter for AC Drives," IEEE Trans. on Power Electronics, Vol.
PE-6, No. 4, October 1991.
|
| " Neural Network
Control of A Chopper-Fed DC Motor", Proceedings of The IEEE 24th
Power Electronics Specialists Conference, (PESC'93), Seattle .
|
| “Motor Drive
Technologies for the Power-By-Wire (PBW):Options, Trends and Tradeoffs, Part
I: Power Electronic Converters and Devices,” IEEE Aerospace and
Electronics Magazine, Vol. 10, No. 11, November 1995, pp.37-41.
|
| “Motor Drive
Technologies for the Power-By-Wire (PBW):Options, Trends and Tradeoffs, Part
II: Motors and Controllers,” IEEE Aerospace and Electronics Magazine, Vol.
10, No. 12, November 1995, pp.31-36.
|
| "Starter/Generator
technologies for Aerospace Applications," IEEE Aerospace and
Electronics Systems Magazine, Vol. 11, No. 10, pp. 17-24, Oct. 1996.
Also, NASA
Technical Memorandum # 107224.
|
| "Energy Efficient
C-dump converter for Switched Reluctance Motors," IEEE Trans. on Power
Electronics, Vol. 12, No. 5, 1997.
|
| " PI & Fuzzy
Estimators for Tuning The Stator Resistance of Direct Torque Control of
Inverter-Fed Induction Machines", IEEE Trans. on Power Electronics,
Vol. 13, No. 2, 1998.
|
| “Implementation of A
Closed-Loop Observer and An Adaptive Controller for Induction Motor
Drives,” IEEE Transactions on Industry Applications, Vol. 34, No. 3, 1998.
|
| "Model of A Switched
Reluctance Machine with On-Line Parameter Adaptation," IEEE Trans. on
Industry Application, Vol. 34, No. 4, 1998.
|
| "Torque ripple
Minimization of Switched Reluctance Machines Over A Wide Speed Range,"
IEEE Trans. on Industry Application, Vol. 34, No. 5, Sep./Oct. 1998.
|
| "Torque Ripple
Minimization of Switched Reluctance Machines using Adaptive Fuzzy
Controller," IEEE Trans. on Industry Application, Vol. 35, No. 2,
Mar./Apr. 1999.
|
| " Inverse Plant
Control using Neural Networks", IEEE
Symposium on Intelligent Systems in Communication and Power,
(SISCAP'94), Puerto Rico, February 1994 .
|
| " Learning
Techniques to train Neural Network As A State Selector for Inverter-Fed
Induction Machines Using Direct Self Control", The IEEE 25th
Power Electronics Specialists Conference, (PESC'94), Taiwan, June 1994.
|
| " PI & Fuzzy
Estimators for Tuning The Stator Resistance of Direct Torque Control of
Inverter-Fed Induction Machines", IEEE 25th
Power Electronics Specialists Conference, (PESC'94), Taiwan, June 1994.
|
| " Tuning the Stator
Resistance in Inverter-Fed Induction Machines Using Direct Self
Control", IEEE 26th
Power Electronics Specialists Conference, (PESC'95), Atlanta, June 1995.
|
| " Precision Torque
Control Of Inverter-Fed Induction Machines", IEEE 26th Power Electronics Specialists Conference, (PESC'95),
Atlanta, June 1995 |
| "Motor Drive
technologies for The Power-By-Wire Program: Options, Trends and
Tradeoffs," Proceedings of The national Aerospace and Electronics
Conference, NAECON'95, Dayton, May 1995. Also
published as NASA Technical Memorandum 106885.
|
| "Application of
Neural Networks & Fuzzy Logic in Control of Induction Machines,” The 4th
Workshop on Neural Network, Ohio Aerospace Institute (OAINN’95), Athens,
Ohio, August 1995.
|
| "Nonlinear Flux
observer with On-line Parameter Tuning for Wide Speed Range of Induction
Machines," Proceedings of The IEEE Industry Application Society 30th
Annual Meeting (IAS'95), Orlando, Florida, October 1995.
|
| "Design Trends and
Tradeoffs for sensorless Operation of Switched Reluctance Motor
Drives," Proceedings of The IEEE Industry Application Society 30th
Annual Meeting (IAS'95), Orlando, Florida, October 1995.
|
| "Energy Efficient
C-dump converter for Switched Reluctance Motors," Proceedings of IEEE
Applied Power Electronics Conference (APEC'96), San Jose, California, March
1996.
|
| "Starter/Generator
technologies for Aerospace Applications," IEEE 1996 National Aerospace
and Electronics Conference, NAECON'96, Dayton, May 1995.
|
| “Implementation of A
Closed-Loop Observer and An Adaptive Controller for Induction Motor
Drives,” IEEE 1996 Industry Applications Society Annual Meeting, San
Diego, October, 1996.
|
| "Model of A Switched
Reluctance Machine with On-Line Parameter Adaptation," Proceedings of
The 1997 IEEE Industry Application Society Meeting, New Orleans, October
1997.
|
| "Torque Ripple
Minimization of Switched Reluctance Machines using Adaptive Fuzzy
Controller," Proceedings of The 1997 IEEE Industry Application Society
Meeting, New Orleans, October 1997.
|
| "Torque Ripple
Minimization of Switched Reluctance Machines Over A Wide Speed Range,"
Proceedings of The 1997 IEEE Industry Application Society Meeting, New
Orleans, October 1997.
|
| “Neural Network
Controllers for Power Factor Correction of AC/Dc Switching Converters,”
Proceedings of The 1998 IEEE Industry Application Society Meeting, St.
Louis, October 1998.
|
| “Torque
Ripple Minimization with on-line Parameter Estimation Using Neural Networks
in Permanent Magnet Synchronous Motors,” Proceedings of The 1998 IEEE
Industry Application Society Meeting, St. Louis, October 1998.
|
| “Speed
and Position Sensorless Control
of Permanent Magnet Synchronous Motors,” Proceedings of The 1999 IEEE
International Conference on Electric Machines and Drives, Seattle, May 1999.
|
| “Speed
and Position Estimation and DSP Implementation in Permanent Magnet
Synchronous Motors Using Neural Networks,” Proceedings of The 5th
Brazilian Power Electronics Conference, Foz do Iguacu, Brazil, September
1999.
|
| "Torque
Ripple Minimization of Switched Reluctance Machines with On-line Parameter
Adaptation," IEEE Trans. on Power Electronics, Vol. 14, No. 3, May/June
2000. |
| "Sliding
Mode Observer for Sensorless PMSM Drive," Proceedings of IEEE IAS’00,
Rome, Italy.
|